From construction projects to crafting, reading a ruler in both inches and centimeters is crucial. But if you’ve ever stumbled when attempting to read these tiny markings, don’t worry; you’re certainly not alone. As frustrating as it can be to navigate those little lines, learning to read a ruler properly can save you time and money. With the right know-how, you’ll be able to accurately measure your materials and get your projects done faster and more efficiently.

In this blog post, we’ll be highlighting the ins and outs of reading a ruler in both inches and centimeters, providing you with all the information you need to become a pro at measuring. So, let’s get started!

## What Is a Ruler?

A ruler is a simple yet essential measuring tool used to determine the length, width, or height of an object. It typically consists of a straight and flat strip of material, such as plastic, wood, or metal, with markings along its length. These markings are used to measure distances, with each marking representing a specific unit of measurement.

Rulers come in various sizes, shapes, and units of measurement, such as inches, centimeters, millimeters, and more. They are widely used in schools, offices, and households for a variety of purposes, from measuring paper and fabric to marking lines for cutting and drawing.

## How to Read a Ruler in Inches

Here are the steps to read a ruler in inches:

- Look for the longest line on the ruler, which represents one inch. This line is typically numbered 1 and may be longer or thicker than the other markings on the ruler.
- Identify the lines that are shorter than the one-inch line. Each of these lines represents a fraction of an inch. The space between each line becomes smaller as the fractions get smaller.
- Read the markings between the inch line and the next shortest line to determine the number of whole inches. For example, if the object being measured falls between the one-inch line and the two-inch line, the measurement is 1 inch.
- Determine the number of fractions of an inch by counting the number of lines between the whole-inch lines. For example, if the object falls between the one-inch line and the 1/8-inch line, the measurement is 1 inch and 1/8 inch.
- If the object being measured extends beyond the last inch line, simply add the additional fractions of an inch to the total measurement.

In order of longest to shortest, these markings are as follows:

Marking | Length | Fraction of an inch |

1 | Longest | 1 |

1/2 | 2nd longest | 1/2 |

1/4 | 3rd longest | 1/4 |

1/8 | – | 1/8 |

1/16 | Shortest | 1/16 |

**How to Read a Ruler with Irregular Fractions**

Measuring inches in fractions like 1/16, 1/8, 1/4, 1/2, or whole inches is second nature to most people. However, there are situations where you might need to measure in non-traditional increments such as thirds, fifths, sevenths, or tenths of an inch. Although this may sound daunting, it’s actually not that hard to do.

The following chart explains the decimal equivalents of each 1/16th tick mark:

Tick Marks | Inches (fraction) | Inches (decimal) |

0 | 0 | 0.0 |

1 | 1/16 | 0.0625 |

2 | 2/16 or 1/8 | 0.125 |

3 | 3/16 | 0.1875 |

4 | 4/16 or ¼ | 0.25 |

5 | 5/16 | 0.3125 |

6 | 6/16 or 3/8 | 0.375 |

7 | 7/16 | 0.4375 |

8 | 8/16 or ½ | 0.5 |

9 | 9/16 | 0.5625 |

10 | 10/16 or 5/8 | 0.625 |

11 | 11/16 | 0.6875 |

12 | 12/16 or ¾ | 0.75 |

13 | 13/16 | 0.8125 |

14 | 14/16 or 7/8 | 0.875 |

15 | 15/16 | 0.9375 |

16 | 16/16 or 1 | 1.0 |

The first thing you need to do when using this table is to figure out the decimal equivalent of the measurement you want. You also need to know the decimal value of each marking on the ruler, which is shown in the chart mentioned earlier.

For example, let’s say you want to figure out what 2/9th of an inch is. 2 divided by 9 is equal to 0.222. Compare this figure with the third column in the chart above and see which markings are closest to it. In this example, 0.222 is closest to the third (3/16) and 4th (4/16 or ¼) tick lines. So, 2/9 of an inch should be somewhere between those lines.

Let’s say you need to measure something 3/10 of an inch long. To do this, divide 3 by 10, which gives you 0.3. Then, refer to the chart and find the tick marks that are closest to this value. In this case, the closest tick marks are the fourth (4/16 or 1/4) and fifth (5/16) lines. This means that the 3/10 inch measurement falls between these two tick marks.

This method can be employed to determine any measurement, no matter how small, even if it’s as minuscule as 1 millionth or 1 billionth of an inch.

Related: What is the Size of a Ruler?

### Where is 1″ on a ruler

On most standard rulers, 1 inch is typically located at the very beginning of the ruler, on the left-hand side. The 1-inch marking is usually represented by the longest line on the ruler, which may also be labeled with the number “1” to indicate one inch.

### Where is 1/2″ on a ruler

On most standard rulers, the 1/2-inch marking is located halfway between the 1-inch marking and the beginning of the ruler.

### Where is 1/3 inch on a ruler

On most standard rulers, there is no direct marking for 1/3 inch, as it is not a standard fraction used in ruler markings. However, there are a couple of ways to estimate and measure 1/3 inch using a ruler.

The value of 1/3 is equivalent to 0.33, which falls between the fifth (5/16 or 0.3125) and sixth (6/16, 3/8, or 0.375) tick lines on the ruler.

Another method is to use a ruler with metric markings and measure 1 centimeter, which is equivalent to 10 millimeters. You can then divide 10 millimeters by 3 to get a measurement of approximately 3.33 millimeters, which is roughly equivalent to 1/3 inch.

### Where is 1/4″ on a ruler

On most standard rulers, the 1/4 inch marking is located between the 1/2 inch marking and the 0 inch (starting point) on the ruler. The 1/4 inch marking is usually represented by a line that is shorter than the 1/2 inch line but longer than the 1/8 inch line.

**Where is 1/6 inch on a ruler**

On most standard rulers, there is no direct marking for 1/6 inch, as it is not a standard fraction used in ruler markings.

If you want to find the measurement of 1/6th, it equals 0.1667 and based on the decimal chart given above, it will be positioned somewhere between the second (2/16) and third (3/16) tick marks on the ruler.

Another method is to use a ruler with metric markings and measure 1 centimeter, which is equivalent to 10 millimeters. You can then divide 10 millimeters by 6 to get a measurement of approximately 1.67 millimeters, which is roughly equivalent to 1/6 inch.

### Where is 1/8″ on a ruler?

On most standard rulers, the 1/8 inch marking is located between the 1/4 inch marking and the 0 inch (starting point) on the ruler. The 1/8 inch marking is usually represented by a line that is shorter than the 1/4 inch line but longer than the 1/16 inch line.

### Where is 1/16″ on a ruler

On most standard rulers, the 1/16 inch marking is the shortest line found between the 1/8 inch marking and the 0 inches (starting point) on the ruler. The 1/16-inch marking is usually located between the 1/8-inch marking and the smallest marking on the ruler.

### Where is 2/3 inch on a ruler

When you know where a 1/3rd inch is on a ruler. You can estimate where 2/3rd of an inch would be by doubling the distance of 1/3rd. However, for more accurate measurements, it’s best to use a reference table.

2/3 is approximately equal to 0.667, which falls between the 10th and 11th marks on a scale from 0 to 1, with the 10th mark being 5/8 or 0.625 and the 11th mark being 11/16 or 0.6875.

### Where is 2/5 inches on a ruler

Some people think that each small line on a ruler shows a distance of 1/10th of an inch, but that’s not correct. In reality, each small line on a ruler represents a distance of 1/16th of an inch. This can cause confusion and make it harder to measure things accurately, especially if you need to find a measurement like 2/5 of an inch.

When you want to measure 2/5 of an inch, you can’t just use the 1/2-inch mark on the ruler because it’s not the same. You have to look between the 6th and 7th small lines on the ruler. The 6th line is for 3/8 (0.375) inch and the 7th line is for 7/16 (0.4375) inch. This way, you can get a more precise measurement.

### Where is 3/4 of an inch on a ruler

To find 3/4 of an inch on a ruler, look between the 1/2 and 1-inch lines. As a reminder, the second and third-longest lines represent half inches and quarter inches, respectively. Measurements can be made more accurate by adding the distance between the second-longest line and the next third-longest line. Another way is to count 1/4th of an inch backward from the 1-inch line.

### Where is 3/8 of an inch on a ruler

To locate 3/8 of an inch on a ruler, first, find the 1/2 inch mark on the ruler, which is typically a longer line than the others. Next, locate the 1/4 inch mark, which is usually represented by a shorter line than the 1/2 inch mark but longer than the 1/8 inch mark. Then, locate the midpoint between the 1/4 inch and 1/2 inch marks.

To locate 3/8 inch, count three lines from the 1/4 inch mark to the 1/2 inch mark. The third line is the 3/8 inch mark.

### Where is 3/16 of an inch on a ruler

Measuring 1/16th of an inch is easy when you use a ruler. Each tick mark on a ruler represents 1/16th of an inch, so to measure 3/16th of an inch, you just need to count three ticks from the right of the 0-inch line.

### Where is 3/32 inch on a ruler

Measuring in the 32nds of an inch can be challenging since most rulers only have markings for 16ths of an inch. However, you can still calculate even fractions of 32nds by dividing them by 2. For example, 4/32, 8/32, and 18/32 can be divided by 2 to get 2/16 or 1/8, 4/16 or 1/4, and 9/16, respectively. This will give you the equivalent measurement in 16ths of an inch. So, next time you need to measure in 32nds, remember to divide by 2!

To measure 3/32 of an inch, you can find it between the 2/32 (1/16) and 4/32 (2/16) marks on a ruler. Another simple way is to consider that 3/32 equals 1.5/16 or the midpoint between the 1/16 and 2/16-inch ticks. So, just locate the halfway mark to get a precise measurement of 3/32 inches.

### Where is 5/8 of an inch on a ruler?

To measure in eighths on a ruler, you need to look for the pairs of tick marks that are 2 1/16th-inch apart. Each set of two tick marks equals 1/8 of an inch. For example, the first pair of tick marks, starting from the 0-inch line, equals 1/8 inch, while the second pair represents 2/8 inch (or 1/4 inch), and so on. By identifying these tick marks, you can easily measure eighths on a ruler.

To measure 5/8 of an inch using a ruler, locate the 1/2-inch line and then count two more ticks beyond it. 5/8 of an inch can also be measured by converting it to 10/16 and counting 10 ticks from the 0-inch line or counting 6 ticks backward from the 1-inch line.

Related:Where is 5/16 of an Inch On A Ruler?

### Where is 7/16 of an inch on a ruler

Knowing that 1/2 is equal to 8/16 can help you find the 7/16-inch tick mark effortlessly on a ruler. You can quickly locate it by measuring one tick, which is equivalent to 1/16 of an inch, beyond the half-inch line. Another method to find the 7/16-inch tick mark is to count seven ticks starting from the 0-inch line. With these simple techniques, you can accurately measure the distance you need with ease.

### Where is 7/8 of an inch on a ruler

Measuring 7/8 of an inch on a ruler can be tricky because it is very close to a full inch. Since each tick represents 1/16th of an inch, you will need to count two ticks back from the 1-inch line to find the 7/8-inch mark accurately. Another option is to count 14 ticks starting from the 0-inch line since 7/8 is equivalent to 14/16.

### Where is 11/16 of an inch on a ruler

Counting in 16ths of an inch using a standard ruler is a breeze since each tick line represents 1/16th of an inch. To measure 11/16th of an inch, count 11 ticks starting from the 0-inch line or 5 ticks before the 1-inch line. You can quickly determine this measurement by locating the half-inch line, which is the second-longest line between the 0 and 1-inch lines. From there, count three ticks to the right since 1/2 or 8/16 plus 3/16 equals 11/16. These simple steps will help you measure accurately with ease.

## How Do Inches Fit On A Ruler (Summary Chart)?

Inch Fraction | Location on Ruler |

1/16 | A tick mark appears after the line of 0 inches |

3/32 | A halfway point between 1/16 (the first tick mark) and 2/16 (the second tick mark) |

1/8 | Following the 0-inch line is the second tickmark |

1/6 | There are two ticks (2/16′′) and three ticks (3/16) between the second and third |

3/16 | On the 0-inch line, the third tick is to the right |

1/4 | The tick line (8th tick mark) is between the 0 and the half-inch mark |

1/3 | In the middle of lines 5 and 6 |

3/8 | The half-inch mark is two tick marks to the left |

2/5 | Sixth and seventh tick marks |

7/16 | The half-inch line is 1 tick away to the left |

1/2 | Between the lines of 0 and 1 inches |

5/8 | The 1/2-inch line should be 2 ticks from the right |

2/3 | Between marks 10 and 11 |

11/16 | One inch from the left, five ticks in |

3/4 | In the middle of the 1/2-inch and 1-inch lines |

7/8 | 1 inch from the left, 2 ticks |

1 | A tick mark 16 inches from the 0 inch mark |

## How to Read a Ruler in Centimeters?

When you flip your ruler, you will see some small lines close together. These lines show centimeters, which is another way to measure things. To use the centimeter side of the ruler, turn it over so that the line at 0 centimeters is on the other end of the ruler. The line at 30 centimeters should be almost on the opposite side of the line at 12 inches.

Did you know that the centimeter side of a ruler functions just like the inch side? However, the tick lines on the centimeter side represent whole centimeters, and you’ll notice large printed numbers from 1 to 30 with nine smaller ticks between them representing millimeters. In other words, it takes 10 millimeters to make 1 centimeter.

Simply position the 0-centimeter mark on the edge of the object you want to measure and then locate the end of the object to see which tick mark it lines up with. This will give you an accurate reading of the object’s length or width in centimeters.

`Related: What is the Size of a Ruler?`

As an example, here’s what I mean:

- If a string measures 9 tick marks on a ruler, that’s equivalent to 9 millimeters or 0.9 centimeters.
- If you measure a piece of string and it’s 4 tick marks long on a ruler, that means it’s 4 millimeters or 0.4 centimeters in length.
- By measuring a piece of string and finding it to be 17 tick marks long on a ruler, you can determine that its length is 17 millimeters or 1.7 centimeters.

If you don’t have a centimeter ruler, you can still measure an object and convert it to centimeters using the inch side of your ruler. For help converting inches to millimeters and centimeters, you can refer to the chart below.

Inches | Millimeters | Centimeters |

0 | 0 | 0 |

1/16 | 1.5875 | 0.15875 |

2/16 or 1/8 | 3.175 | 0.3175 |

3/16 | 4.7625 | 0.47625 |

4/16 or ¼ | 6.35 | 0.635 |

5/16 | 7.9375 | 0.79375 |

6/16 or 3/8 | 9.525 | 0.9525 |

7/16 | 11.1125 | 1.11125 |

8/16 or ½ | 12.7 | 1.27 |

9/16 | 14.2875 | 1.42875 |

10/16 or 5/8 | 15.875 | 1.5875 |

11/16 | 17.4625 | 1.74625 |

12/16 or ¾ | 19.05 | 1.905 |

13/16 | 20.6375 | 2.06375 |

14/16 or 7/8 | 22.225 | 2.2225 |

15/16 | 23.8125 | 2.38125 |

16/16 or 1 | 25.4 | 2.54 |

2 | 50.8 | 5.08 |

3 | 76.2 | 7.62 |

4 | 101.6 | 10.6 |

5 | 127 | 12.7 |

6 | 152.4 | 15.24 |

8 | 203.2 | 20.32 |

10 | 254 | 25.4 |

12 | 304.8 | 30.48 |

## Ruler Reading: Why It’s Important

Reading a ruler accurately is an important skill that can be useful in many different contexts. Here are a few reasons why:

- Precise measurement: A ruler allows you to make precise measurements, which is essential for many tasks, including construction, engineering, and scientific research.
- Standardization: Rulers provide a standardized way of measuring distances, which is important for consistency and accuracy in various fields.
- Communication: Rulers help to facilitate clear communication between people who need to discuss measurements or dimensions of objects.
- DIY projects: Whether you’re building a bookshelf, making a dress, or hanging a picture frame, a ruler is an essential tool to ensure that your project turns out the way you want it to.
- Academic success: Students who know how to read a ruler accurately are better equipped to complete assignments, conduct experiments, and succeed in math and science classes.

## FAQs

### How do you read an inch ruler in cm?

To read an inch ruler in cm, you need to know that one inch is equal to 2.54 cm. So, to convert inches to cm, simply multiply the measurement in inches by 2.54. To read a measurement on an inch ruler in cm, locate the line that corresponds to the measurement in inches and then convert it to cm using the conversion factor.

### How do you read inches on a ruler?

To read inches on a ruler, look for the numbered lines marked in increments of 1/16ths, 1/8ths, 1/4ths, 1/2s, and whole inches. The lines marking the whole inch are usually longer and marked with a whole number, while the lines marking the fractions of an inch are shorter and marked with a fraction.

### What is 3 4 on a ruler?

3 4 on a ruler represents 3/4 inch or 0.75 inches. The line marking 3/4 inch is usually located between the 1/2-inch and 1-inch marks.

### What are the cm and inch in the ruler?

A ruler typically has both cm and inch units marked on it. The cm units are marked in increments of 1, while the inch units are marked in increments of 1/16ths, 1/8ths, 1/4ths, 1/2s, and whole inches. The conversions between the two units can be made using the conversion factor of 2.54, as mentioned above.